The 2 disc 2 cup 1 brush configuration is an excellent cleaning pig that is typically used for the removal of paraffin, black powder, bacteria and other unwanted debris. The cups provide a great seal while the discs and brush scrape and remove any unwanted debris. The brushes Pigs can be modified to meet specific job requirements

The 2 disc 2 cup configuration is a great all around steel pig. The discs provide good debris removal and the cups provide a great seal and long wear. Pigs can be modified to meet specific job requirements.

The 3 disc 2 cup configuration is a great sealing pig that is used for the removal of liquid and unwanted debris. The multiple sealing elements allow this pig to be effective on long runs, perform great on nitrogen purges as well as clean aggressively. Pigs can be modified to meet specific job requirements.

The 4 disc 2 brush configuration is a cleaning pig that is typically used for the removal of paraffin, black powder, bacteria and other unwanted debris. Pigs can be modified to meet specific job requirements

The 4 disc configuration is a cleaning and dewatering pig that is used for the removal of solids and liquids when tight radius bends are present in the line. Pigs can be modified to meet specific job requirements

The 5 disc 1 brush configuration is an aggressive cleaning pig that is typically used for the removal of paraffin, black powder, bacteria and other unwanted debris. Pigs can be modified to meet specific job requirements

The 5 disc 2 cup configuration is a superior sealing pig that is used for the removal of liquid and unwanted debris. The multiple sealing elements allow this pig to be effective on long runs, perform great on nitrogen purges as well as clean aggressively. Pigs can be modified to meet specific job requirements.

The 6 disc configuration is a cleaning and dewatering pig that provides a great seal. Great pig to use for nitrogen purges, batching and the removal of solids and liquids. Pigs can be modified to meet specific job requirements

The Bare Squeegee is an effective pig to run for liquid removal after a hydro-test. It has also proven to maintain a superior seal when flow rates are minimal. Bare Squeegees can be modified to accommodate transmitters, magnets and/or radioactive sources. Bare Squeegee pigs come in medium (5lb), or high (9lb) foam densities.

The Black Belt is outfitted with urethane blades molded into the foam for maximum scraping power. The tough urethane blades are great for paraffin removal. The urethane blades make it the perfect choice for plastic or internally coated pipelines, where traditional brush pigs cannot be used. The Black Belt is available in both medium and heavy density urethane foam. The Black Belt can be modified to accommodate transmitters, magnets and/or radioactive sources.

Caliper pigs are designed to measure the roundness of the pipeline to determine areas of deformation.

Criss-Cross pigs have a urethane coating which provides extra durability and allows the pig to travel longer distances without being damaged. These pigs can be modified to accommodate transmitters, magnets and/or radioactive sources. Criss-Cross pigs come in soft (2lb), medium (5lb), or high (9lb) foam densities.

Foam disc pigs have a series of ridges or discs that help to provide extra wiping and sealing capabilities. Because this foam pig provides such a good seal, foam disc pigs are ideal for a number of applications including, product recovery and removal, de-watering, and nitrogen purges. Foam disc pigs are available in both medium (5lb) and heavy density (9lb) foam. Foam disc pigs can be modified to accommodate transmitters, magnets and/or radioactive sources.

Foam Spheres can be an ideal pig to run when there are tees, tight radius bends or other challenges to negotiate. Foam Spheres can be manufactured in both 5lb and 9lb foam densities in sizes 2” – 36”. The spheres can be made in the following options: bare foam, criss cross coating, totally coated, silicone carbide and wire brush.

The Hand-Launch Pig is a single-piece, bi-directional foam pig manufactured with long-wearing yet flexible urethane foam discs. They are designed to navigate dual-diameter situations well and especially good at running in PE pipe where weld joints require flexibility. Hand-Launch Pigs are available in both medium and heavy density urethane foam. Hand Launch Pigs can be modified to accommodate transmitters, magnets and/or radioactive sources. Hand Launch pigs come in medium (5lb), or high (9lb) foam densities.

Introducing IsoSmart™, the comprehensive asset monitoring solution from GPT Industries! Engineered with 3 True RMS (TRMS) circuits, IsoSmart™ offers automatic testing for the effectiveness of your assets' CP, Isolation, or bond current levels.

The K-DISC is a solid cast bi-directional scraping pipeline pig. The stiff discs are tapered at their base giving superior scraping and sweeping capabilities. This pig is ideal for wax, sludge and black powder removal. It is also easy to clean off after a successful run.

Metal studs are set in this foam pig for aggressive removal of hard scale deposits. Due to their aggressiveness, the metal stud pig is to be used with caution and only in the most extreme circumstances. The metal stud pig can be modified to accommodate transmitters, magnets and/or radioactive sources. The metal stud pig can also be outfitted with pull ropes to make pig removal easier.

Drinkwater’s Multi-Diameter Pigs are designed for aggressive cleaning in multiple diameters lines. The engineered design offers superior seal and brushing capabilities critical for maintaining these challenging lines. They are ideal for pre-cleaning runs before an ILI run as well.

The Nova-Cast Pig is a custom-designed, all-urethane, one-piece, composite pipeline pig made to accommodate special pipeline configurations with virtually limitless combinations of discs and cups of varying urethane hardnesses.

Pig Trains are designed primarily for aggressive cleaning before an ILI run. The extra length and weight give it added cleaning capabilities ensuring that your smart pig run will be successful. Pig trains are also useful when tight radius bends are present but aggressive cleaning options are required.

Pigging spheres are great pigs for liquid removal and are easily used in conjunction with automated launchers. They are capable of making tight radius bends and tees and come in a variety of sizes to accommodate your needs.

The Power Brush Foam pig is used when aggressive cleaning is needed. Its heavy density foam is completely covered with tough wire brushes enabling it to remove large amounts of paraffin wax as well as hardened scale deposits. The power brush can be modified to accommodate transmitters, magnets and/or radioactive sources. The Power Brush pigs come in medium (5lb), or high (9lb) foam densities.

This Silicone Carbide pig offers a "sandpaper" effect on the pipe wall and is great for loosening dirt and scale build-up often found in water lines. The Silicone Carbide pigs are available in both medium and heavy density urethane foam. The Silicone Carbide pigs can be modified to accommodate transmitters, magnets and/or radioactive sources.

The Smart SphereTM does everything a regular inflatable pigging sphere can do, but it also has the capability to be tracked.

The Spiral Wire Brush Foam Pig is a good cleaning pig for removing normal amounts of scale and deposits. The wire brushes rub against the pipe wall loosening weld slag, rust, and other unwanted agents. The spiral wire brush can be modified to accommodate transmitters, magnets and/or radioactive sources. The spiral wire brush can also be outfitted with pull ropes to make pig removal easier. Spiral Wire pigs come in soft (2lb), medium (5lb), or high (9lb) foam densities.

This pig is a solid-cast polyurethane pig available for 2” through 8” pipe. It is a bi-directional pig ideal for use in plant and industrial applications. The 8 sealing discs making it very effective in removing liquids in wet gas systems and liquid lines, as well as ideal for product batching, line displacement, and product evacuation.

The bare swab is made with 2lb foam density. The bare swab is an unaggressive, but useful pig. They are used on many water utility lines for sweeping unwanted build-up and determining the effective internal diameter of pipe. The swab is also used for drying lines after hydrotesting and has proven to be a safe pig to run if the operator is unsure of the condition of his/her pipeline.

This pig is a solid-cast polyurethane pig for 2” through 36” pipe. It is available in up to three different durometers for varying projects. The 5 sealing discs and a rear cup design is extremely effective in removing liquids in wet gas systems and liquid lines. The hollow core makes the pig lightweight and uses the line pressure to expand the pig helping to create a superior long lasting seal. This superior sealing capability make it ideal for product batching, line displacement, and product evacuation. Wire Brushes may be added when more aggressive pigging is required as well as transmitters for pig tracking.

The Turbo Flex II is a one-piece polyurethane pig for 2” through 24” pipe. It is available in up to three different durometers for varying projects. Just like the regular turbo flex, the turbo flex II (4 discs and 2 cups) is effective in removing liquids in wet gas systems and liquid lines. Unlike the standard turbo flex, the turbo flex II has a cup on the front of the pig to make launching the pig easier on operators. The hollow core makes the pig lightweight, transmitter capable and uses the line pressure to expand the pig helping to create a superior long-lasting seal. This superior sealing capability make it ideal for product batching, line displacement, and product evacuation. Wire brushes may be added when more aggressive pigging is required.

This pig is a solid-cast polyurethane pig available for 2" through 8" pipe. The disc-cup design combines the effective wiping action of the disc with the superior sealing capabilities of the cup. This pig is effective in removing liquids from wet gas systems and liquid pipelines. It is also used to control paraffin build up in crude oil lines, separation of refined products, and product evacuation.

This solid-cast polyurethane pig is designed for 2" through 30" pipe and available in up to three different durometers. The unique cup design allows smooth transition with full wall seal through tees, check valves and full opening valves. The hollow core allows expansion while under pressure for maximum performance at all times and may be used to house transmitters for pig tracking. Bolt on wire brushes are available when more aggressive cleaning is required. The Turbo Magnum is effective in removing liquids from wet gas systems and liquid pipelines. Also used to control paraffin build up in crude oil lines, separation of refined products, pipeline commissioning and product evacuation.

The Ultra-Cast is a one-piece polyurethane pig available in multiple durometers for 2” through 24” pipelines.

The Ultra-Seal Pig offers the best sealing of any pig on the market. It has a patented design consisting of both foam and urethane arranged in unique manner making it ideal for use on nitrogen purges, liquid removal or any other scenario where bypass is to be eliminated. The Ultra-Seal can also altered to include a EZ launch nose for vertical launchers or low flow situations. The Ultra-Seal can be modified to accommodate transmitters, magnets and/or radioactive sources.

The Ultra-Seal Lite Pig is a hand-crafted, custom-built pig. The specific design and materials for each pig are determined by the configuration of the pipeline and operational requirements of the pig. The Ultra-Seal Lite pig is known to offer superior sealing in multi-diameter lines and is typically used for dewatering, flooding and fluid control. Ultra-Seal Lite pigs can be modified to accommodate transmitters, magnets and/or radioactive sources. Ultra-Seal Lite pigs are offered in medium (5lb), or high (9lb) foam densities.